Alinco DJ-G7T programming software
Open WebCHIRPWebCHIRP programs the Alinco DJ-G7T in your browser. It runs the CHIRP project's own driver for this radio, so it reads and writes the same codeplug the desktop software does — without installing anything.
No driver install needed
Alinco programming cables use a CH340, CP2102, PL2303 or FTDI USB-serial chip. WebCHIRP speaks to all four directly from the browser, so there is no driver package to download and no Windows version to match. Plug the cable in and pick the port when the browser asks.
What you can edit on the DJ-G7T
- 1000 memory channels, numbered 0 to 999
- Channel names up to 16 characters
- Modes: AM, FM, NFM, WFM
- Bands: 0.5–1300 MHz
- Tone squelch: Cross, DTCS, TSQL, TSQL-R, Tone
Can I update the firmware on the DJ-G7T?
Alinco publishes a firmware update for the DJ-G7T that you can install yourself. Alinco publishes a DJ-G7T/E/EG firmware updater; the radio is flashed in clone mode over an ERW-7 cable.
Firmware downloads at alinco.com
WebCHIRP does not flash firmware. It reads and writes the channel list and settings over the programming cable, which is a separate part of the radio.
How to program a Alinco DJ-G7T
- Plug the programming cable into the radio and the computer.
- Open WebCHIRP, check Alinco DJ-G7T is selected, and press Download.
- Edit the channels, or pull in nearby repeaters from a directory.
- Press Upload to write the result back to the radio.
Questions
Do I need to install a USB driver to program the Alinco DJ-G7T?
No. WebCHIRP talks to CH340, CP2102, PL2303 or FTDI programming cables from the browser, so there is nothing to install on Windows, macOS or Linux.
Do I need the Alinco CPS software?
No. WebCHIRP runs CHIRP's own Alinco DJ-G7T driver in the browser, so it reads and writes the same codeplug the desktop software does.
How many channels does the Alinco DJ-G7T hold?
1000, numbered 0 to 999 in the channel table.
Can I update the firmware on the Alinco DJ-G7T?
Alinco publishes a firmware update for the DJ-G7T that you can install yourself. Alinco publishes a DJ-G7T/E/EG firmware updater; the radio is flashed in clone mode over an ERW-7 cable. WebCHIRP does not flash firmware. It reads and writes the channel list and settings over the programming cable, which is a separate part of the radio.