Anysecu AC-580 programming software
Open WebCHIRPWebCHIRP programs the Anysecu AC-580 in your browser. It runs the CHIRP project's own driver for this radio, so it reads and writes the same codeplug the desktop software does — without installing anything.
No driver install needed
Anysecu programming cables use a CH340, CP2102, PL2303 or FTDI USB-serial chip. WebCHIRP speaks to all four directly from the browser, so there is no driver package to download and no Windows version to match. Plug the cable in and pick the port when the browser asks.
What you can edit on the AC-580
- 128 memory channels, numbered 0 to 127
- Channel names up to 10 characters
- Transmit power: H 5.0W, L 1.0W
- Modes: AM, FM, NFM
- Bands: 136–174 MHz, 400–480 MHz, 108–136 MHz
- Tone squelch: Cross, DTCS, TSQL, Tone
- Radio-wide settings, not just the channel list
Can I update the firmware on the AC-580?
The AC-580 has no firmware update: its firmware is written at the factory and is not replaceable in the field. Identical to the Radioddity GS-5B, for which only programming software and manuals are published, no firmware.
WebCHIRP does not flash firmware. It reads and writes the channel list and settings over the programming cable, which is a separate part of the radio.
How to program a Anysecu AC-580
- Plug the programming cable into the radio and the computer.
- Open WebCHIRP, check Anysecu AC-580 is selected, and press Download.
- Edit the channels, or pull in nearby repeaters from a directory.
- Press Upload to write the result back to the radio.
Questions
Do I need to install a USB driver to program the Anysecu AC-580?
No. WebCHIRP talks to CH340, CP2102, PL2303 or FTDI programming cables from the browser, so there is nothing to install on Windows, macOS or Linux.
Do I need the Anysecu CPS software?
No. WebCHIRP runs CHIRP's own Anysecu AC-580 driver in the browser, so it reads and writes the same codeplug the desktop software does.
How many channels does the Anysecu AC-580 hold?
128, numbered 0 to 127 in the channel table.
Can I update the firmware on the Anysecu AC-580?
The AC-580 has no firmware update: its firmware is written at the factory and is not replaceable in the field. Identical to the Radioddity GS-5B, for which only programming software and manuals are published, no firmware. WebCHIRP does not flash firmware. It reads and writes the channel list and settings over the programming cable, which is a separate part of the radio.