AnyTone 778UV VOX programming software
Open WebCHIRPWebCHIRP programs the AnyTone 778UV VOX in your browser. It runs the CHIRP project's own driver for this radio, so it reads and writes the same codeplug the desktop software does — without installing anything.
No driver install needed
AnyTone programming cables use a CH340, CP2102, PL2303 or FTDI USB-serial chip. WebCHIRP speaks to all four directly from the browser, so there is no driver package to download and no Windows version to match. Plug the cable in and pick the port when the browser asks.
What you can edit on the 778UV VOX
- 200 memory channels, numbered 1 to 200
- Channel names up to 6 characters
- Transmit power: Low 5.0W, Medium 10W, High 25W
- Modes: FM, NFM
- Bands: 136–174 MHz, 400–490 MHz
- Tone squelch: Cross, DTCS, TSQL, Tone
- Radio-wide settings, not just the channel list
Can I update the firmware on the 778UV VOX?
The 778UV VOX has no firmware update: its firmware is written at the factory and is not replaceable in the field. AnyTone's download page lists programming software for this analog model, not firmware.
AnyTone downloads at anytone.net
WebCHIRP does not flash firmware. It reads and writes the channel list and settings over the programming cable, which is a separate part of the radio.
How to program a AnyTone 778UV VOX
- Plug the programming cable into the radio and the computer.
- Open WebCHIRP, check AnyTone 778UV VOX is selected, and press Download.
- Edit the channels, or pull in nearby repeaters from a directory.
- Press Upload to write the result back to the radio.
Questions
Do I need to install a USB driver to program the AnyTone 778UV VOX?
No. WebCHIRP talks to CH340, CP2102, PL2303 or FTDI programming cables from the browser, so there is nothing to install on Windows, macOS or Linux.
Do I need the AnyTone CPS software?
No. WebCHIRP runs CHIRP's own AnyTone 778UV VOX driver in the browser, so it reads and writes the same codeplug the desktop software does.
How many channels does the AnyTone 778UV VOX hold?
200, numbered 1 to 200 in the channel table.
Can I update the firmware on the AnyTone 778UV VOX?
The 778UV VOX has no firmware update: its firmware is written at the factory and is not replaceable in the field. AnyTone's download page lists programming software for this analog model, not firmware. WebCHIRP does not flash firmware. It reads and writes the channel list and settings over the programming cable, which is a separate part of the radio.