RT Systems CSV programming software

WebCHIRP programs the RT Systems CSV in your browser. It runs the CHIRP project's own driver for this radio, so it reads and writes the same codeplug the desktop software does — without installing anything.

Program my CSV now

No driver install needed

RT Systems programming cables use a CH340, CP2102, PL2303 or FTDI USB-serial chip. WebCHIRP speaks to all four directly from the browser, so there is no driver package to download and no Windows version to match. Plug the cable in and pick the port when the browser asks.

What you can edit on the CSV

• 1000 memory channels, numbered 0 to 999
• Channel names up to 999 characters
• Modes: AM, Auto, CW, CWR, DIG, DMR, DN, DV, FM, FSK, FSKR, LSB, NAM, NCW, NCWR, NFM, NXDN, P25, PKT, RTTY, RTTYR, USB, WFM
• Bands: 0–10000 MHz
• Tone squelch: Cross, DTCS, DTCS-R, TSQL, TSQL-R, Tone

How to program a RT Systems CSV

1. Plug the programming cable into the radio and the computer.
2. Open WebCHIRP, check RT Systems CSV is selected, and press Download.
3. Edit the channels, or pull in nearby repeaters from a directory.
4. Press Upload to write the result back to the radio.

Questions

Do I need to install a USB driver to program the RT Systems CSV?

No. WebCHIRP talks to CH340, CP2102, PL2303 or FTDI programming cables from the browser, so there is nothing to install on Windows, macOS or Linux.

Do I need the RT Systems CPS software?

No. WebCHIRP runs CHIRP's own RT Systems CSV driver in the browser, so it reads and writes the same codeplug the desktop software does.

How many channels does the RT Systems CSV hold?

1000, numbered 0 to 999 in the channel table.

All supported radios