TYT TH-9800 programming software
Open WebCHIRPWebCHIRP programs the TYT TH-9800 in your browser. It runs the CHIRP project's own driver for this radio, so it reads and writes the same codeplug the desktop software does — without installing anything.
No driver install needed
TYT programming cables use a CH340, CP2102, PL2303 or FTDI USB-serial chip. WebCHIRP speaks to all four directly from the browser, so there is no driver package to download and no Windows version to match. Plug the cable in and pick the port when the browser asks.
What you can edit on the TH-9800
- 800 memory channels, numbered 1 to 800
- Channel names up to 6 characters
- Transmit power: Low 5.0W, Mid2 10W, Mid1 20W, High 50W
- Modes: AM, FM, NFM, WFM
- Bands: 26–33 MHz, 47–54 MHz, 108–180 MHz, 220–260 MHz, 350–399.995 MHz, 400–512 MHz, 750–950 MHz
- Tone squelch: DTCS, TSQL, Tone
- Radio-wide settings, not just the channel list
How to program a TYT TH-9800
- Plug the programming cable into the radio and the computer.
- Open WebCHIRP, check TYT TH-9800 is selected, and press Download.
- Edit the channels, or pull in nearby repeaters from a directory.
- Press Upload to write the result back to the radio.
Questions
Do I need to install a USB driver to program the TYT TH-9800?
No. WebCHIRP talks to CH340, CP2102, PL2303 or FTDI programming cables from the browser, so there is nothing to install on Windows, macOS or Linux.
Do I need the TYT CPS software?
No. WebCHIRP runs CHIRP's own TYT TH-9800 driver in the browser, so it reads and writes the same codeplug the desktop software does.
How many channels does the TYT TH-9800 hold?
800, numbered 1 to 800 in the channel table.